Power CD+G Burner problem

beneaton · Post by **beneaton** » Tue Mar 08, 2005 5:59 am

I loaded a trial copy of the Power CD+G Burner and installed it with no problem but when I rip tracks from my DVD/ROM drive all I get is 10Mb of null data and my DVD/RW drive does not respond, even though both show up in the drive selection windows.

Post by **admin** » Tue Mar 08, 2005 8:03 am

Have you been able to read CD+Gs with any other software?

Because it looks like your drive does not support reading CD+G subcodes. One thing to try is to download ASPI drivers from here:

http://www.adaptec.com/worldwide/suppor ... =ASPI-4.70

If it does not work, then I am sorry, but there is nothing we can do.

beneaton · Post by **beneaton** » Tue Mar 08, 2005 9:59 am

I thought of that too but before I try that is there a list of CD+G compatible drives and is "Power CD+G Burner" copatible with any USB drives?

Thank you!

Post by **admin** » Wed Mar 09, 2005 1:38 am

We are currently investigating how to enable USB drives with our software -- bad news are at the moment they are not supported.

AZsmiley68 · Post by **AZsmiley68** » Mon Mar 14, 2005 10:08 am

Well, that would explain my delama. My DVD burner says it's CD+G capible, but it didn't work - it's USB and you are saying there is no support for those kind.

Post by **admin** » Thu Mar 24, 2005 10:16 am

Power CD+G Burner 1.1.2 works now with several USB devices -- you may give it a try.

Get Help & Advice on Installing & Using Karaoke Software by Power Karaoke